2-Inch Lift Kit for Porsche Cayenne 955/957 (2002–2010)
Regular price
$899.00 USD
Sale price
$899.00 USD
Regular price
Unit price
per
$99 shipping
Vehicle fitment
Fits Porsche Cayenne 955/957 & VW Touareg (2002–2010)
Not sure? Get a free fit check before you order →
Couldn't load pickup availability
In stock · Delivered in 4–6 weeks · Tracked worldwide
Message on Instagram
Email Us
Low stock
2-Inch Lift Kit for Porsche Cayenne 955/957 (2002–2010)
Adds two inches of real ground clearance to the Cayenne 955 and 957 using precision-machined forged 7075 aluminum spacers fitted above the factory strut tops. The factory air suspension is fully retained — nothing removed, cut, or fabricated.
Specifications
| Spacer material | Forged 7075 aluminum alloy |
| Lift height | 2 inches |
| Finish | Corrosion-resistant e-coating |
| Factory air suspension | Fully retained — nothing removed |
| Front mounting | Spacers fit over OEM struts — no strut removal |
| Rear | Cradle drop maintains suspension geometry |
| Warranty | 1 year, replacement parts included |
Key Features
- Forged 7075 aluminum spacers, precision machined
- Factory air suspension fully retained — sensors and compressors stay operational
- Front spacers install over the OEM struts, so no strut removal is needed
- Rear cradle drop keeps suspension geometry correct
- 2 inches of extra clearance and room for larger tyres
- Within typical road-legal lift limits in most regions (under 3 inches)
- Direct bolt-on — no cutting or welding
- 1-year warranty with free replacement parts
Fitment
- Porsche Cayenne 955 (2002–2007)
- Porsche Cayenne 957 (2008–2010)
Installation
- Difficulty: Intermediate — mechanical experience recommended
- Time: 4–6 hours
- Tools: Floor jack, jack stands, socket set, torque wrench
- Cutting / drilling / welding: None required
- Required afterwards: Full wheel alignment
Geometry Correction
Any lift over 1.5 inches benefits from geometry correction. Pair this kit with our Subframe Drop Kit, Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links for a fully corrected build.
Frequently Asked Questions
Does this remove or replace the factory air suspension?
No. The factory air suspension is completely retained. The spacers fit above the factory strut top mounts, so all air suspension components, sensors, and compressors stay in place and operational.
Will this trigger fault codes or warning lights?
On air suspension models the ride height sensor may flag a warning once the lift is fitted. Our Adjustable Level Sensor Links recalibrate the sensor position to prevent this, and are strongly recommended for air suspension vehicles.
Is a wheel alignment required?
Yes — a full wheel alignment is required after any suspension modification. Book it immediately after fitting for correct tyre wear, safe handling, and accurate steering.
Is this lift legal for road use?
At 2 inches it falls within the legal lift limit in most countries and US states. Modification laws vary by region, so check your local regulations before fitting any suspension lift.
What tyre size can I run after a 2-inch lift?
Typically up to around 275/65R18, depending on wheel offset. Email info@overlandtrek.com with your wheel specs for a precise recommendation.
What warranty is included?
One year. If any component has a defect within 12 months of purchase, replacement parts are provided free of charge — email info@overlandtrek.com with your order number.
