Porsche Cayenne 955/957 & VW Touareg Höherlegungssatz 75 mm / 3 Zoll Komplettset (2002–2010)
Normaler Preis
$1,098.00 USD
Verkaufspreis
$1,098.00 USD
Normaler Preis
Stückpreis
pro
$99 shipping
Vehicle fitment
Fits Porsche Cayenne 955/957 & VW Touareg (2002–2010)
Not sure? Get a free fit check before you order →
Verfügbarkeit für Abholungen konnte nicht geladen werden
In stock · Delivered in 4–6 weeks · Tracked worldwide
Message on Instagram
Email Us
Niedriger Lagerbestand
Porsche Cayenne 955/957 & VW Touareg 3-Inch Lift Kit Complete Set(2002–2010)
The maximum-clearance lift for the Gen 1 Cayenne and Touareg platform. Forged 7075 aluminum and high-carbon manganese steel spacers fit above the factory strut top mounts, retaining the factory air suspension while delivering the largest tyre fitment the platform will take.
Geometry correction is required with this kit — not optional. See below.
Specifications
| Spacer material | Forged 7075 aluminum alloy and high-carbon manganese steel |
| Lift height | 3 inches |
| Finish | Corrosion-resistant e-coating |
| Factory air suspension | Fully retained — nothing removed |
| Geometry correction | Required (Included) |
| Max tyre (approx.) | 285/70R18, subject to wheel offset |
| Warranty | 1 year, replacement parts included |
Key Features
- 3 inches of additional ride height — maximum clearance for the platform
- Forged 7075 aluminum and manganese steel spacers, precision machined
- Factory air suspension fully retained — sensors and compressors stay operational
- Largest tyre fitment available on this platform
- Direct bolt-on — no cutting, drilling, or welding
- 1-year warranty with free replacement parts
Fitment
- Porsche Cayenne 955 (2002–2007)
- Porsche Cayenne 957 (2008–2010)
- Volkswagen Touareg Gen 1 (2002–2010)
Installation
- Difficulty: Intermediate — mechanical experience recommended
- Time: 4–6 hours
- Tools: Floor jack, jack stands, socket set, torque wrench
- Cutting / drilling / welding: None required
- Required afterwards: Geometry correction parts fitted, then a full wheel alignment
Geometry Correction — Required at 3 Inches
At 3 inches of lift, CV angles, control arm geometry, and sway bar angles are all significantly affected. Running this kit without correction leads to accelerated tyre wear, poor handling, and possible CV joint failure. This kit must be paired with the appropriate subframe drop kit — Cayenne or Touareg — plus Tubular Upper Control Arms, Adjustable Sway Bar End Links, and Adjustable Level Sensor Links.
Frequently Asked Questions
Does this remove or replace the factory air suspension?
No. The factory air suspension is completely retained. The spacers fit above the factory strut top mounts, so all air suspension components, sensors, and compressors stay in place and operational.
Is geometry correction really required at 3 inches?
Yes — required, not optional. At 3 inches, CV angles, control arm geometry, and sway bar angles are significantly affected. Running this kit without correction causes accelerated tyre wear, poor handling, and potential CV joint failure.
Is a wheel alignment required?
Yes. Fit the geometry correction parts first, then book a full wheel alignment immediately. Do not drive long distances before both are done.
Is a 3-inch lift legal where I live?
Vehicle modification and ride height laws vary considerably by country and by US state, and a 3-inch lift exceeds the limit in some regions. Check your local regulations before fitting. If you need to stay within a lower limit, our 2-inch kit may be the better option.
What is the largest tyre I can run?
Around 285/70R18 with suitable wheel offset. Email info@overlandtrek.com with your wheel specs for a precise recommendation.
What warranty is included?
One year. If any component has a defect within 12 months of purchase, replacement parts are provided free of charge — email info@overlandtrek.com with your order number.
