VW Touareg Gen 1 Bull Bar Front Bumper (2002–2007)
Regular price
$1,498.00 USD
Sale price
$1,498.00 USD
Regular price
Unit price
per
$199 shipping
Vehicle fitment
Fits VW Touareg (2002–2007)
Not sure? Get a free fit check before you order →
Couldn't load pickup availability
In stock · Delivered in 4–8 weeks · Tracked worldwide
Made in our own factory — not a reseller
Cut, welded and e-coated in-house on our own production line since 2021.
See how we build it →
Follow us on Instagram
Email Us
In stock
VW Touareg Gen 1 Bull Bar Front Bumper (2002–2007)
Tubular front bumper with an integrated bull bar for the pre-facelift VW Touareg Gen 1 (2002–2007). It does not fit the 2008–2010 facelift, which has its own bull bar. Built from high-carbon manganese steel with 50 mm (1.97 in) tube and a 6 mm (0.236 in) winch plate rated for winches up to 12,000 lb, fully e-coated inside and out. It bolts to the factory mounting points with no cutting, drilling, or welding, and is fully reversible.
Specifications
| Material | High-carbon manganese steel |
| Tube diameter | 50 mm (1.97 in) |
| Tube wall thickness | 3 mm (0.118 in — 11-gauge) |
| Plate thickness | 5 mm (0.197 in — thicker than 3/16 in) |
| Winch plate | Included as standard — 6 mm (0.236 in) manganese steel, rated for winches up to 12,000 lb (5,443 kg). Winch unit sold separately. |
| Weight | 40 kg (88 lb) |
| Finish | Full e-coating, inside and out |
| Mounting | Factory mounting points — fully reversible |
Key Features
- 6 mm (0.236 in) manganese steel winch plate included as standard — rated for winches up to 12,000 lb (5,443 kg), no separate purchase needed. Winch unit sold separately.
- Integrated bull bar for upper front-end protection
- 50 mm (1.97 in) tube with 3 mm (11-gauge) wall throughout
- Integrated light mounting brackets for auxiliary lighting
- Improved approach angle for steeper trails and rock crawling
- Integrated recovery points rated for trail recovery and winching
- Compatible with factory sensors, lighting, and airbag systems
Fitment
- Volkswagen Touareg (Gen 1, pre-facelift)
- 2002–2007
Installation
- Difficulty: Intermediate — DIY-friendly with basic mechanical experience
- Time: 2–4 hours
- Tools: Floor jack, jack stands, socket set, torque wrench
- Cutting / drilling / welding: None required
Frequently Asked Questions
Is a winch plate included?
Yes. Every Overlandtrek front bumper ships with a 6 mm (0.236 in) manganese steel winch plate rated to accept winches up to 12,000 lb (5,443 kg) — you don't need to buy one separately. The winch unit itself is not included.
How thick is the steel?
The tube is 50 mm (1.97 in) diameter with a 3 mm wall — 0.118 in, or roughly 11-gauge. The mounting plate is 5 mm (0.197 in), which is thicker than the 3/16 in plate commonly used on comparable bumpers. The winch plate is thicker again at 6 mm (0.236 in).
How much does this bumper weigh?
40 kg (88 lb). Added front-end weight may cause slight nose sag on stock suspension — owners also fitting a winch should consider heavier front springs or a levelling kit.
Will this fit my 2002–2007 Touareg?
Yes — fits all Touareg Gen 1 pre-facelift trims. Not compatible with 2008–2010 facelift — select the correct version for your year.
Can I mount lights on the bull bar?
Yes — integrated brackets accept LED light bars and pod lights. Lighting sold separately.
Do I need to cut or drill anything?
No. Direct bolt-on using factory mounting points.
