Porsche Cayenne 957 High-Clearance Front Bumper (2008–2010)
Regular price
$1,499.00 USD
Sale price
$1,499.00 USD
Regular price
Unit price
per
$199 shipping
Vehicle fitment
Fits Porsche Cayenne 957 (2008–2010)
Not sure? Get a free fit check before you order →
Couldn't load pickup availability
In stock · Delivered in 4–8 weeks · Tracked worldwide
Made in our own factory — not a reseller
Cut, welded and e-coated in-house on our own production line since 2021.
See how we build it →
Follow us on Instagram
Email Us
In stock
Porsche Cayenne 957 High-Clearance Front Bumper (2008–2010)
High-clearance tubular front bumper for the Porsche Cayenne 957 (2008–2010), cut back for maximum approach angle on steep terrain. Built from high-carbon manganese steel with 50 mm (1.97 in) tube and a 6 mm (0.236 in) winch plate rated for winches up to 12,000 lb, fully e-coated inside and out. Direct bolt-on using the factory tow point mounts, and fully reversible.
Specifications
| Material | High-carbon manganese steel |
| Tube diameter | 50 mm (1.97 in) |
| Tube wall thickness | 3 mm (0.118 in — 11-gauge) |
| Plate thickness | 5 mm (0.197 in — thicker than 3/16 in) |
| Winch plate | Included as standard — 6 mm (0.236 in) manganese steel, rated for winches up to 12,000 lb (5,443 kg). Winch unit sold separately. |
| Weight | 45 kg (99 lb) |
| Finish | Full e-coating, inside and out |
| Mounting | Factory mounting points — fully reversible |
Key Features
- 6 mm (0.236 in) manganese steel winch plate included as standard — rated for winches up to 12,000 lb (5,443 kg), no separate purchase needed. Winch unit sold separately.
- High-clearance design for maximum approach angle on steep terrain
- 50 mm (1.97 in) tube with 3 mm (11-gauge) wall throughout
- Integrated recovery points rated for trail recovery and winching
- Built-in light mounting provisions for LED light bars or pod lights
- Compatible with factory sensors, lighting, and airbag systems
Fitment
- Porsche Cayenne 957 (Gen 1 Facelift)
- 2008–2010
- Trims: Base, S, Turbo, Turbo S, GTS, Diesel
Installation
- Difficulty: Intermediate — DIY-friendly with basic mechanical experience
- Time: 2–4 hours
- Tools: Floor jack, jack stands, socket set, torque wrench
- Cutting / drilling / welding: None required
Frequently Asked Questions
Is a winch plate included?
Yes. Every Overlandtrek front bumper ships with a 6 mm (0.236 in) manganese steel winch plate rated to accept winches up to 12,000 lb (5,443 kg) — you don't need to buy one separately. The winch unit itself is not included.
How thick is the steel?
The tube is 50 mm (1.97 in) diameter with a 3 mm wall — 0.118 in, or roughly 11-gauge. The mounting plate is 5 mm (0.197 in), which is thicker than the 3/16 in plate commonly used on comparable bumpers. The winch plate is thicker again at 6 mm (0.236 in).
How much does this bumper weigh?
45 kg (99 lb). Added front-end weight may cause slight nose sag on stock suspension — owners also fitting a winch should consider heavier front springs or a levelling kit.
How does this differ from the standard off-road front bumper?
The high-clearance version is cut back further at the lower corners for a steeper approach angle, at the cost of some lower coverage.
Will this fit my 957 Cayenne?
Yes — fits all 2008–2010 Cayenne 957 trims including Diesel.
Do I need to cut or drill anything?
No. Direct bolt-on using factory tow point mounts.
