Porsche Cayenne 957 Bull Bar Front Bumper (2008–2010)
Regular price
$1,499.00 USD
Sale price
$1,499.00 USD
Regular price
$1,199.00 USD
Unit price
per
$199 shipping
Vehicle fitment
Fits Porsche Cayenne 957 (2008–2010)
Not sure? Get a free fit check before you order →
Couldn't load pickup availability
In stock · Delivered in 4–6 weeks · Tracked worldwide
Message on Instagram
Email Us
Low stock
Porsche Cayenne 957 Bull Bar Front Bumper (2008–2010)
Tubular front bumper with integrated bull bar for the Porsche Cayenne 957, adding upper front-end protection. Direct bolt-on using factory tow point mounts.
Specifications
| Material | High-carbon manganese steel |
| Tube diameter | 50 mm (1.97 in) |
| Tube wall thickness | 3 mm (0.118 in — 11-gauge) |
| Plate thickness | 5 mm (0.197 in — thicker than 3/16 in) |
| Winch plate | Included as standard — 6 mm (0.236 in) manganese steel, rated for winches up to 12,000 lb (5,443 kg). Winch unit sold separately. |
| Weight | 40 kg (88 lb) |
| Finish | Full e-coating, inside and out |
| Mounting | Factory mounting points — fully reversible |
Key Features
- 6 mm (0.236 in) manganese steel winch plate included as standard — rated for winches up to 12,000 lb (5,443 kg), no separate purchase needed. Winch unit sold separately.
- Integrated bull bar for upper front-end protection
- 50 mm (1.97 in) tube with 3 mm (11-gauge) wall throughout
- Integrated light mounting brackets for auxiliary LED lighting
- Improved approach angle for steeper trails and rock crawling
- Integrated recovery points rated for trail recovery and winching
- Compatible with factory sensors, lighting, and airbag systems
Fitment
- Porsche Cayenne 957 (Gen 1 Facelift)
- 2008–2010
- Trims: Base, S, Turbo, Turbo S, GTS, Diesel
Installation
- Difficulty: Intermediate — DIY-friendly with basic mechanical experience
- Time: 2–4 hours
- Tools: Floor jack, jack stands, socket set, torque wrench
- Cutting / drilling / welding: None required
Frequently Asked Questions
Is a winch plate included?
Yes. Every Overlandtrek front bumper ships with a 6 mm (0.236 in) manganese steel winch plate rated to accept winches up to 12,000 lb (5,443 kg) — you don't need to buy one separately. The winch unit itself is not included.
How thick is the steel?
The tube is 50 mm (1.97 in) diameter with a 3 mm wall — 0.118 in, or roughly 11-gauge. The mounting plate is 5 mm (0.197 in), which is thicker than the 3/16 in plate commonly used on comparable bumpers. The winch plate is thicker again at 6 mm (0.236 in).
How much does this bumper weigh?
40 kg (88 lb). Added front-end weight may cause slight nose sag on stock suspension — owners also fitting a winch should consider heavier front springs or a levelling kit.
How does this differ from the high-clearance front bumper?
The bull bar version adds an integrated upper bar and more lighting mounting area. The high-clearance version is cut back further for a steeper approach angle.
Will this fit my 957 Cayenne?
Yes — fits all 2008–2010 Cayenne 957 trims including Diesel.
Can I mount lights on the bull bar?
Yes — integrated brackets accept LED light bars and pod lights. Lighting sold separately.
