Porsche Cayenne 957 Dual Swingout Rear Bumper — V1 (2008–2010)
Regular price
$1,899.00 USD
Sale price
$1,899.00 USD
Regular price
Unit price
per
$199 shipping
Vehicle fitment
Fits Porsche Cayenne 957 (2008–2010)
Not sure? Get a free fit check before you order →
Couldn't load pickup availability
In stock · Delivered in 4–6 weeks · Tracked worldwide
Message on Instagram
Email Us
Low stock
Porsche Cayenne 957 Dual Swingout Rear Bumper — V1 (2008–2010)
Heavy-duty dual swingout rear bumper for the Porsche Cayenne 957, with spare tire carrier and jerry can mount. Bolt-on installation with the factory exhaust fully retained.
This is the V1 (original) design of our 957 dual swingout rear bumper. It shares the same steel construction, 50 mm tube / 3 mm tube wall / 5 mm plate build, load ratings, and bolt-on installation as the V2 version — the two differ only in styling. If you prefer the updated look, see the V2 design.
Specifications
| Material | High-carbon manganese steel |
| Tube diameter | 50 mm (1.97 in) |
| Tube wall thickness | 3 mm (0.118 in — 11-gauge) |
| Plate thickness | 5 mm (0.197 in — thicker than 3/16 in) |
| Finish | Textured e-coating |
| Mounting | Factory mounting points — fully reversible |
| Static load capacity | Up to 200 kg (441 lb) — weight carried by the bumper itself |
| Swing arm capacity | 50 kg (110 lb) per arm — full-size spare wheel and tyre |
Key Features
- Dual independently locking swing-out arms, rated 50 kg (110 lb) per arm
- Bumper rated for up to 200 kg (441 lb) static load
- 50 mm (1.97 in) tube with 3 mm (11-gauge) wall
- Spare tire carrier included — mounts full-size spare wheel and tyre up to 50 kg (110 lb)
- Swing arms fully removable for daily driving
- Factory exhaust fully retained — only the clip-on lower trim is removed
- Normal tailgate operation — swing the arm open, then open the tailgate
- Raised hitch mounting point for improved departure angle
- Reinforced recovery points for trail recovery and winching
Fitment
- Porsche Cayenne 957 (Gen 1 Facelift)
- 2008–2010
- Trims: Base, S, Turbo, Turbo S, GTS, Diesel
- Not compatible with Cayenne 955 (2002–2007)
Installation
- Difficulty: Intermediate — two people recommended due to weight
- Time: 3–5 hours
- Tools: Floor jack, jack stands, socket set, torque wrench
- Cutting / drilling / welding: None required
- Bodywork experience: Not required — lower factory trim is clip-on
Frequently Asked Questions
What is the difference between the V1 and V2 designs?
The V1 and V2 bumpers are built from the same steel, use the same 50 mm tube with 3 mm wall and 5 mm plate construction, carry the same load ratings, and bolt on identically. They differ only in styling — V1 is the original design, V2 is the updated look. Choose whichever appearance you prefer.
What are the load ratings?
The bumper supports up to 200 kg (441 lb) static load — the weight the bumper itself carries. Each swing arm is independently rated for 50 kg (110 lb), enough for a full-size spare wheel and tyre on one arm, with jerry cans or recovery gear on the other. These are static figures, not towing ratings.
Does this require removing the factory exhaust or muffler?
No. Only the lower clip-on factory bumper trim is removed. The muffler, exhaust tips, and all emissions components stay in place.
Can I still open my tailgate normally?
Yes. Swing one or both arms open like a door, then open the tailgate as usual.
Can the swing arms be removed for daily driving?
Yes. The arms are fully removable and reinstall in minutes.
Will this fit my 957 Cayenne?
Yes — fits all 2008–2010 Cayenne 957 trims including Diesel. Not compatible with the 955 (2002–2007).
