Porsche Cayenne & VW Touareg & Audi Q7 Adjustable Front Sway Bar End Links – Lift Kit
Regular price
724.00 SAR
Sale price
724.00 SAR
Regular price
Unit price
per
Vehicle fitment
Fits Porsche Cayenne, VW Touareg & Audi Q7
Not sure? Get a free fit check before you order →
Couldn't load pickup availability
In stock · Delivered in 4–6 weeks · Tracked worldwide
Message on Instagram
Email Us
In stock
Adjustable Front Sway Bar End Links — Lift Geometry Correction
Lift the vehicle far enough and the factory end links become too short, holding the sway bar under constant preload. The result is clunking over bumps, stiff handling, and rapid ball joint wear. These adjustable links let you dial the sway bar back to the correct angle for your lift height.
For air suspension lift builds, from 3 inches of lift. Lift geometry correction only becomes necessary at 3 inches and above, so these are not needed on a 2-inch lift. They also do not apply to our 2-Inch Steel Spring Lift Kit, which deletes the air suspension altogether.
Choose your car from the Select your vehicle dropdown above. Five options cover the range: Cayenne 955 (2002–2007), Cayenne 957 (2008–2010), Touareg Gen 1 (2002–2007), Touareg Gen 1.5 Facelift (2008–2010), and Audi Q7. The links are built for the car you pick.
Specifications
| Material | 7075 aluminum alloy |
| Required from | 3 inches of lift — not needed at 2 inches |
| Suits | Air suspension lift builds — not the steel spring air delete kit |
| Adjustment range | Suits 2–3 inches of lift |
| Finish | Corrosion-resistant e-coating |
| Mounting | Direct replacement for factory end links |
| Warranty | 1 year, replacement parts included |
Key Features
- Required geometry correction from 3 inches of lift — not needed on a 2-inch build
- Adjustable length — set the correct sway bar geometry for your specific lift height
- Eliminates sway bar bind, clunking, and premature joint wear on lifted air suspension builds
- Heavy-duty construction, significantly stronger than factory links
- Direct bolt-on replacement for the factory end links
- Corrosion-resistant e-coat finish
- 1-year warranty with free replacement parts
Fitment
| Your car | Option to select |
| Porsche Cayenne 955, 2002–2007 | Porsche Cayenne 955 (2002–2007) |
| Porsche Cayenne 957 facelift, 2008–2010 | Porsche Cayenne 957 (2008–2010) |
| VW Touareg 7L pre-facelift, 2002–2007 | VW Touareg Gen 1 (2002–2007) |
| VW Touareg 7L facelift, 2008–2010 | VW Touareg Gen 1.5 Facelift (2008–2010) |
| Audi Q7 | Audi Q7 |
Factory air suspension is required. This part does not fit the Cayenne 958 or Touareg Gen 2.
Installation
- Difficulty: Beginner-friendly
- Tools: Basic hand tools, plus a lift or ramps
- Cutting / drilling / welding: None required — instructions included
- Recommended afterwards: Alignment appointment following any geometry correction work
Complete Your 3-Inch Build
For a fully corrected 3-inch air suspension lift, pair these with the 1-Inch Subframe Drop Kit, Tubular Upper Control Arms, and Adjustable Level Sensor Links.
Frequently Asked Questions
Which option should I select?
Match the option to your car's model year. Cayenne 955 for 2002–2007 cars, Cayenne 957 for the 2008–2010 facelift. On the Touareg, Gen 1 is the 2002–2007 pre-facelift 7L and Gen 1.5 Facelift is the 2008–2010 car. Or select Audi Q7. If you are unsure, email your VIN to info@overlandtrek.com before you order.
Do I need these on a 2-inch lift?
No. Lift geometry correction is required from 3 inches and above. At 2 inches the sway bar stays within its normal working angle, so the factory end links are fine.
Do I need these with the 2-inch steel spring (air delete) kit?
No. These end links are for lift builds that keep the factory air suspension. The steel spring kit removes the air system and already includes its subframe drop kit, so no additional geometry correction parts are required with it.
What happens if I run a 3-inch lift without them?
At that height the factory links are too short for the new ride height, so the sway bar sits under constant preload. That causes clunking over bumps, stiff handling, and rapid wear of the end link ball joints.
How do I set the correct length?
Instructions are included. With the vehicle at ride height on a flat surface, adjust each link until the sway bar sits at the correct angle — typically close to horizontal. An alignment shop can verify and set this during your alignment appointment.
Can I install these myself?
Yes — straightforward with basic hand tools and a lift or ramps. An alignment appointment is recommended after any geometry correction work.
What warranty is included?
One year. If any component has a defect within 12 months of purchase, replacement parts are provided free of charge — email info@overlandtrek.com with your order number.
