{"title":"VW Touareg Gen 2 (7P) Off-Road Parts","description":"\u003cp\u003eOff-road parts for the \u003cstrong\u003eVW Touareg Gen 2 (7P, 2011–2018)\u003c\/strong\u003e — winch-ready front bumper, roof rack and lift kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the Gen 2 Touareg is a different platform from the Gen 1. It shares its architecture with the Porsche Cayenne 958 rather than the 7L, so Gen 1 bumpers, skid plates and lift kits do not fit — and neither do 955\/957 Cayenne parts. Everything on this page is confirmed for the 7P specifically.\u003c\/p\u003e\u003cp\u003eThe Gen 2 kept the low-range transfer case and centre diff lock on properly equipped models, so the mechanical capability is still there. What it lost was clearance and underbody protection, which is where a lift and a steel front bumper earn their place.\u003c\/p\u003e\u003cp\u003eThe front bumper carries a 6 mm manganese steel winch plate rated to 12,000 lb as standard. The lift kit is a full suspension system rather than a spacer kit, so it corrects geometry rather than just raising the body.\u003c\/p\u003e\u003cp\u003eBolt-on fitment. In stock and shipped factory-direct from our own workshop in China, door to door with duties handled. Order processing and after-sales support are handled by our US-based team.\u003c\/p\u003e","products":[{"product_id":"cayenne-958-touareg-gen-2-lift-kit-2011-2018","title":"Porsche Cayenne 958 \u0026 VW Touareg Gen 2 2-Inch Lift Kit – Suspension System (2011–2018)","description":"\u003ch2\u003ePorsche Cayenne 958 \u0026amp; VW Touareg Gen 2 2-Inch Lift Kit — Suspension System (2011–2018)\u003c\/h2\u003e\n\u003cp\u003eA purpose-built off-road suspension system for the 958 Cayenne and Gen 2 Touareg. Mono-tube shock construction, heavy-duty shock forks at double OEM thickness, and trail-tuned damping — with 2 inches of lift added above the factory air suspension so the whole air system stays in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo geometry correction parts are required at this height.\u003c\/strong\u003e A full wheel alignment after fitting is all that is needed.\u003c\/p\u003e\n\u003cp style=\"background:#f4f4f4;border-left:3px solid #999;padding:12px 16px;margin:16px 0;font-size:14px;\"\u003e\u003cstrong\u003eEach vehicle has its own kit — choose your car from the \u003cem\u003eSelect your vehicle\u003c\/em\u003e dropdown above.\u003c\/strong\u003e The Cayenne 958 and the Touareg Gen 2 use different mounting hardware, so the kit is built for the car you pick. Both cover model years 2011–2018.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 16px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eShock construction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eMono-tube, trail-tuned damping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eShock forks\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eHeavy-duty — double OEM thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eSpacer material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eForged 7075 aluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eLift height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eGeometry correction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eNot required — needed only from 3 inches of lift\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eVehicle-specific\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eYes — built per vehicle, not a universal kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eCorrosion-resistant e-coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eFactory air suspension\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eFully retained — nothing removed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e1 year, replacement parts included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 inches of additional ride height, with no geometry correction parts required\u003c\/li\u003e\n\u003cli\u003eMono-tube shock construction with trail-tuned damping\u003c\/li\u003e\n\u003cli\u003eHeavy-duty shock forks at double the thickness of OEM components\u003c\/li\u003e\n\u003cli\u003eMade specifically for your vehicle — Cayenne 958 or Touareg Gen 2\u003c\/li\u003e\n\u003cli\u003eFactory air suspension fully retained — sensors and compressors stay operational\u003c\/li\u003e\n\u003cli\u003eForged 7075 aluminum lift spacers, precision machined\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to factory mounting points — no cutting or welding\u003c\/li\u003e\n\u003cli\u003e1-year warranty with free replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/gen-2-lift-suspension-system-958touareg-11-18lift-suspension-systemoverlandtrekoverlandtrekot-c958-lk-gen21-85a8fff4-20a1-4e52-9bff-bfcc9b8da7eb-4303556.png?v=1778490631\" alt=\"Cayenne 958 and Touareg Gen 2 lift kit mono-tube shock absorber detail\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:16px 0;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:2px solid #d0d0d0;width:55%;\"\u003e\u003cstrong\u003eYour car\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:2px solid #d0d0d0;\"\u003e\u003cstrong\u003eOption to select\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003ePorsche Cayenne 958, 2011–2018\u003c\/td\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003ePorsche Cayenne 958 (2011–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003eVW Touareg 7P, 2011–2018\u003c\/td\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003eVW Touareg Gen 2 (2011–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThis kit does \u003cstrong\u003enot\u003c\/strong\u003e fit the Gen 1 platforms — Cayenne 955 and 957, or Touareg Gen 1 and Gen 1.5 Facelift. For those cars, see our \u003ca href=\"\/en-es\/products\/2-inch-lift-kit-for-porsche-cayenne-955-957-2002-2010\"\u003e\u003cstrong\u003eCayenne 2-inch kit\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"\/en-es\/products\/2-inch-lift-kit-touareg-2002-2010\"\u003e\u003cstrong\u003eTouareg 2-inch kit\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — mechanical experience recommended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime:\u003c\/strong\u003e 4–6 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools:\u003c\/strong\u003e Floor jack, jack stands, socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling \/ welding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired afterwards:\u003c\/strong\u003e Full wheel alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGeometry Correction — Not Needed At This Height\u003c\/h3\u003e\n\u003cp\u003eLift geometry correction becomes necessary from 3 inches and above, where CV and control arm angles move outside the factory working range. At 2 inches the suspension stays within tolerance, so this kit fits as supplied and a full wheel alignment afterwards is all that is required. If you want to correct driveline angles anyway, the \u003ca href=\"\/en-es\/products\/1-inch-subframe-drop-kit-cayenne-touareg-q7-2002-2018\"\u003e\u003cstrong\u003e1-Inch Subframe Drop Kit\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/en-es\/products\/porsche-cayenne-vw-touareg-tubular-upper-control-arms\"\u003e\u003cstrong\u003eTubular Upper Control Arms\u003c\/strong\u003e\u003c\/a\u003e both cover the 958 and Gen 2.\u003c\/p\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eFactory air suspension retained\u003c\/strong\u003e\u003cbr\u003eLift added above factory system — nothing removed\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003e1-year warranty\u003c\/strong\u003e\u003cbr\u003eFree replacement parts within 12 months\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eMono-tube shocks, HD forks\u003c\/strong\u003e\u003cbr\u003eDouble OEM thickness, trail-tuned damping\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e⚠️ \u003cstrong\u003eWheel alignment required\u003c\/strong\u003e\u003cbr\u003eBook alignment after installation\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich option should I select?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePorsche Cayenne 958 for the 2011–2018 Cayenne, or VW Touareg Gen 2 for the 2011–2018 7P Touareg. If you are unsure which your car is, email your VIN to \u003ca href=\"mailto:info@overlandtrek.com\"\u003einfo@overlandtrek.com\u003c\/a\u003e before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much lift does this add?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e2 inches. That keeps it within the legal lift limit in most countries and US states, and below the 3-inch threshold where geometry correction parts become necessary.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need geometry correction parts with this kit?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. At 2 inches the factory geometry stays within its working range. A full wheel alignment after fitting is all that is needed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes this remove or replace the factory air suspension?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. The factory air suspension is completely retained. Lift is added above the factory strut top mounts, so all air suspension components, sensors, and compressors stay in place and continue to function normally.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eIs a wheel alignment required?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — a full wheel alignment is required after fitting any lift kit. Skipping it causes uneven tyre wear and affects handling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this legal for road use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe kit raises the vehicle 2 inches, which is within the legal limit in most countries and US states. Modification laws vary by region, so check your local regulations before fitting.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat warranty is included?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eOne year. If any component has a defect within 12 months of purchase, replacement parts are provided free of charge — email info@overlandtrek.com with your order number.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Overlandtrek","offers":[{"title":"Porsche Cayenne 958 (2011–2018)","offer_id":47605284929757,"sku":"OT-C958-LK-GEN2","price":898.0,"currency_code":"USD","in_stock":true},{"title":"VW Touareg Gen 2 (2011–2018)","offer_id":48599231201501,"sku":"OT-TRG2-LK-GEN2","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/porsche-cayenne-958-vw-touareg-gen-2-lift-kit-suspension-system-2011-2018lift-suspension-systemoverlandtrekoverlandtrekot-c958-lk-gen2gen-2-lift-suspension-syst-3668385.webp?v=1784692386"},{"product_id":"vw-touareg-2nd-gen-958-cayenne-premium-aluminum-alloy-roof-rack","title":"VW Touareg Gen 2 (2011–2018) \u0026 Porsche Cayenne 958 Aluminum Alloy Roof Rack","description":"\u003ch2\u003eVW Touareg Gen 2 \u0026amp; Porsche Cayenne 958 Aluminum Alloy Roof Rack (2011–2018)\u003c\/h2\u003e\n\u003cp\u003ePremium roof rack built from 7075 aluminum alloy for the VW Touareg Gen 2 (7P) and Porsche Cayenne 958. Rated to 200 kg static with meaningfully less roof weight than a steel rack. Bolt-on to factory roof rail points.\u003c\/p\u003e\n\u003cp style=\"background:#f4f4f4;border-left:3px solid #999;padding:12px 16px;margin:16px 0;font-size:14px;\"\u003e\u003cstrong\u003eTwo choices to make above: first your car, then your configuration.\u003c\/strong\u003e The Touareg Gen 2 and the Cayenne 958 use different mounting hardware, so the rack is built for the car you pick from the \u003cem\u003eSelect your vehicle\u003c\/em\u003e dropdown. Then choose under \u003cem\u003eFeatures\u003c\/em\u003e — the rack on its own, or the rack together with the rear window molle panel.\u003c\/p\u003e\n\u003cdiv style=\"background: #fff8e1; color: #4a3b00; border: 1px solid #f5d37a; border-left: 5px solid #f5a623; border-radius: 8px; padding: 14px 18px; margin: 20px 0; font-size: 15px; line-height: 1.6;\"\u003e⚠️ \u003cstrong\u003ePlease confirm fitment before ordering\u003c\/strong\u003e\u003cbr\u003eEmail clear photos of your vehicle's roof and roof rails to \u003ca href=\"mailto:info@overlandtrek.com?subject=Roof%20Rack%20Fitment%20Check\" style=\"color: #4a3b00;\"\u003e\u003cstrong\u003einfo@overlandtrek.com\u003c\/strong\u003e\u003c\/a\u003e. Our team will check them and confirm the rack fits your vehicle, so you can place your order with confidence.\u003c\/div\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/vw-touareg-2nd-gen-premium-aluminum-alloy-roof-rack-overlandtrekroof-rackoverlandtrekoverlandtrektouareg-roofrack-8971905_480x480.jpg?v=1781235429\" alt=\"VW Touareg Gen 2 aluminum alloy roof rack side profile mounted on factory roof rails\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 16px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e7075 aluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eDimensions (L × W × H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e200 × 120.5 × 16.5 cm (78.7 × 47.4 × 6.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e28 kg (62 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e200 kg static\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eVehicle-specific\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eYes — built per vehicle, not a universal rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eFull e-coating, inside and out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eFactory roof rail points — fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e7075 aluminum alloy construction — 5 kg lighter than our steel rack at the same 200 kg rating\u003c\/li\u003e\n\u003cli\u003e200 kg static load capacity\u003c\/li\u003e\n\u003cli\u003eMade specifically for your vehicle — Touareg Gen 2 or Cayenne 958\u003c\/li\u003e\n\u003cli\u003eLess weight up high means less stress on the roof and better handling\u003c\/li\u003e\n\u003cli\u003eOptional rear window molle panel for extra gear storage\u003c\/li\u003e\n\u003cli\u003eCompatible with awnings, Rotopax, jerry can holders, and hi-lift jack mounts\u003c\/li\u003e\n\u003cli\u003eMounts to factory roof rail points — no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant e-coat finish for long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:16px 0;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:2px solid #d0d0d0;width:55%;\"\u003e\u003cstrong\u003eYour car\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:2px solid #d0d0d0;\"\u003e\u003cstrong\u003eOption to select\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003ePorsche Cayenne 958, 2011–2018\u003c\/td\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003ePorsche Cayenne 958 (2011–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003eVW Touareg 7P, 2011–2018\u003c\/td\u003e\n\u003ctd style=\"padding:8px 12px;border-bottom:1px solid #e8e8e8;\"\u003eVW Touareg Gen 2 (2011–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eFactory roof rails must be fitted to the vehicle. This rack does \u003cstrong\u003enot\u003c\/strong\u003e fit the Gen 1 cars — for the Cayenne 955\/957 or Touareg Gen 1 and Gen 1.5 Facelift (2002–2010), see our modular steel roof racks.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — two people recommended for lifting onto the roof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime:\u003c\/strong\u003e 1–2 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools:\u003c\/strong\u003e Basic socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling \/ welding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eDirect bolt-on fitment\u003c\/strong\u003e\u003cbr\u003eNo cutting, drilling, or modifications\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4–6 weeks, tracking provided\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eIn stock now\u003c\/strong\u003e\u003cbr\u003eMade in our own factory, ready to ship\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eExpert support\u003c\/strong\u003e\u003cbr\u003eEmail info@overlandtrek.com anytime\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich options should I select?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTwo choices. First your car: Porsche Cayenne 958 or VW Touareg Gen 2, both 2011–2018. Then your configuration: the roof rack on its own, or the roof rack together with the rear window molle panel. If you are unsure which your car is, email your VIN to \u003ca href=\"mailto:info@overlandtrek.com\"\u003einfo@overlandtrek.com\u003c\/a\u003e before you order.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat size is the rack?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe platform measures 200 × 120.5 × 16.5 cm (78.7 × 47.4 × 6.5 in), length × width × height. Height is the rack itself and does not include the factory roof rails it sits on.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the load capacity?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rack is rated at 200 kg static load. Always check your vehicle's factory roof load rating in the owner's manual and do not exceed the lower of the two limits.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy aluminum instead of steel?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eAt 28 kg this rack is 5 kg lighter than our steel modular rack while carrying the same 200 kg static rating. Less weight up high means less stress on the roof and better handling, with excellent corrosion resistance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the rear window molle panel?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eAn optional panel that mounts at the rear window and adds molle-compatible storage for recovery gear, straps, and tools. Choose the second option under \u003cem\u003eFeatures\u003c\/em\u003e to include it with the rack.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need factory roof rails installed?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the rack mounts to the factory roof rail points. If your vehicle does not have factory rails fitted, email info@overlandtrek.com to discuss options.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I mount an awning, Rotopax, or jerry cans?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — compatible with standard overland accessories including awnings, Rotopax fuel packs, jerry can holders, and hi-lift jack mounts.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Overlandtrek","offers":[{"title":"Porsche Cayenne 958 (2011–2018) \/ Roof Rack","offer_id":48117238825181,"sku":"OT-TRG2-RR-AL","price":799.0,"currency_code":"USD","in_stock":true},{"title":"Porsche Cayenne 958 (2011–2018) \/ Roof rack + Rear window molle Panel","offer_id":48117238857949,"sku":"OT-TRG2-RR-AL-MP","price":898.0,"currency_code":"USD","in_stock":true},{"title":"VW Touareg Gen 2 (2011–2018) \/ Roof Rack","offer_id":48628672561373,"sku":"OT-TRG2-RR-AL-TG2","price":799.0,"currency_code":"USD","in_stock":true},{"title":"VW Touareg Gen 2 (2011–2018) \/ Roof rack + Rear window molle Panel","offer_id":48628672594141,"sku":"OT-TRG2-RR-AL-MP-TG2","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/vw-touareg-2nd-gen-premium-aluminum-alloy-roof-rack-overlandtrekroof-rackoverlandtrekoverlandtrek2ndgentouaregroofrack-1024608.jpg?v=1781235429"},{"product_id":"vw-touareg-2nd-gen-steel-front-winch-bumper","title":"VW Touareg 2nd Gen Off-Road Steel Front Bumper with Winch Mount (2011–2018)","description":"\u003ch2\u003eVW Touareg Gen 2 Off-Road Front Bumper with Winch Mount (2011–2018)\u003c\/h2\u003e\n\u003cp\u003eHeavy-duty front bumper for the VW Touareg Gen 2 with a 6 mm (0.236 in) manganese steel winch plate included as standard, rated for winches up to 12,000 lb. Preserves factory parking sensor and radar sensor cutouts.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin: 16px 0;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eHigh-carbon manganese steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eTube diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e50 mm (1.97 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eTube wall thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e3 mm (0.118 in — 11-gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003ePlate thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e5 mm (0.197 in — thicker than 3\/16 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eWinch plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eIncluded as standard — 6 mm (0.236 in) manganese steel, rated for winches up to 12,000 lb (5,443 kg). Winch unit sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003e38 kg (84 lb) — bumper only, winch not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eFull e-coating, inside and out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8; width: 40%;\"\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #e8e8e8;\"\u003eFactory mounting points — fully reversible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 mm (0.236 in) manganese steel winch plate included as standard — rated for winches up to 12,000 lb (5,443 kg), with centered fairlead opening. Winch unit sold separately.\u003c\/li\u003e\n\u003cli\u003eAccepts synthetic rope or steel cable\u003c\/li\u003e\n\u003cli\u003ePreserves factory parking sensor and radar sensor cutouts\u003c\/li\u003e\n\u003cli\u003eCNC-bent 50 mm (1.97 in) tubing with 3 mm (11-gauge) wall\u003c\/li\u003e\n\u003cli\u003eImproved approach angle for steeper trails and rock crawling\u003c\/li\u003e\n\u003cli\u003eIntegrated recovery points in addition to the winch mount\u003c\/li\u003e\n\u003cli\u003eBuilt-in light mounting provisions for LED light bars or pod lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVolkswagen Touareg Gen 2\u003c\/li\u003e\n\u003cli\u003e2011–2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Intermediate — DIY-friendly with basic mechanical experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime:\u003c\/strong\u003e 2–4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools:\u003c\/strong\u003e Floor jack, jack stands, socket set, torque wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting \/ drilling \/ welding:\u003c\/strong\u003e None required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 1px; background: #e0e0e0; border: 1px solid #e0e0e0; border-radius: 8px; overflow: hidden; margin: 24px 0;\"\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eDirect bolt-on fitment\u003c\/strong\u003e\u003cbr\u003eNo cutting, drilling, or modifications\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eWorldwide tracked shipping\u003c\/strong\u003e\u003cbr\u003eDelivery in 4–6 weeks, tracking provided\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eIn stock now\u003c\/strong\u003e\u003cbr\u003eMade in our own factory, ready to ship\u003c\/div\u003e\n\u003cdiv style=\"background: #f8f8f8; padding: 14px 18px; font-size: 14px; line-height: 1.5;\"\u003e✅ \u003cstrong\u003eExpert support\u003c\/strong\u003e\u003cbr\u003eEmail info@overlandtrek.com anytime\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs a winch plate included?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Every Overlandtrek front bumper ships with a 6 mm (0.236 in) manganese steel winch plate rated to accept winches up to 12,000 lb (5,443 kg) — you don't need to buy one separately. The winch unit itself is not included.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow thick is the steel?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe tube is 50 mm (1.97 in) diameter with a 3 mm wall — 0.118 in, or roughly 11-gauge. The mounting plate is 5 mm (0.197 in), which is thicker than the 3\/16 in plate commonly used on comparable bumpers. The winch plate is thicker again at 6 mm (0.236 in).\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much does this bumper weigh?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e38 kg (84 lb) for the bumper alone. A 12,000 lb winch typically adds a further 35–40 kg (77–88 lb), so plan for roughly 75–80 kg (165–176 lb) total once a winch is fitted. Owners running a winch should consider heavier front springs or a levelling kit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this fit my Touareg Gen 2?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — fits all 2011–2018 Touareg Gen 2 trims. Direct bolt-on using factory mounting points.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat size winch fits the integrated mount?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 6 mm (0.236 in) manganese steel mounting plate accommodates winches up to 12,000 lb. The centered fairlead opening supports both synthetic rope and steel cable. Winch sold separately.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eWill my parking sensors and radar sensor still work?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — the bumper includes cutouts that preserve the factory parking sensors and radar sensor mount, so Gen 2 driver-assist features stay functional.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails open=\"\"\u003e\n\u003csummary\u003e\u003cstrong\u003eDo I need to cut or drill anything?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. Direct bolt-on using factory mounting points.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Overlandtrek","offers":[{"title":"Default Title","offer_id":48170294444253,"sku":"OT-TRG2-FB-WM","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/files\/vw-touareg-2nd-gen-off-road-steel-front-bumper-with-winch-mount-2011-2017front-bumperoverlandtrekoverlandtrekot-trg2-fb-wm2ndgentouaregfront-bumper-5652313.jpg?v=1784091074"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/6394\/1597\/collections\/vw-touareg-gen-2-7p-off-road-parts-1386761.jpg?v=1787842206","url":"https:\/\/overlandtrek.com\/en-es\/collections\/vw-touareg-gen-2-7p-off-road-parts.oembed","provider":"Overlandtrek","version":"1.0","type":"link"}